 |
|
|||
|
|
||||
|
Home
Our Products
Advantage
History
System
FAQ
PDF
Contact Us
Find Us
|
||||
|
|
||||
|
|
||||
|
|
||||
| Spider Top Damper | ||||
 |
 |
|||
| Drop in Spider Top Damper | ||||
|
The Spider™ Top Damper’s heavy steel construction will withstand
repeated chimney fires. The recessed design does not induce additional
turbulence at the flue’s termination point or interact with the
prevailing wind. All clay flue tile sizes, round single wall, flexible
flue liners, class A solid pack, and air insulated factory flues are
accommodated. Installation is simple and damper is recessed
approximately 6 inches below the flue’s termination pointideal for
restoration projects where an exposed damper is objectionable. A rain
cover of your choice can now be installed over it without fear of a
freezing or sticking damper. The Spider™ Top Damper is the ultimate
replacement for worn-out, warped and defective factory-built zero
clearance dampers. Available in all round sizes: 6 to 24-inch; square
sizes 8x8, 12x12, 18x18; rectangular sizes 8x12, 13x18. The Spider™ is
now the standard damper for the Bellfires Refractory Fireplace.
|
||||
|
|
||||
